The packaging process for various food products can have different methods, according to this issue, appropriate machines or equipment must be installed at the entrance and exit or in the tray sealer packaging machine to fulfill the desired request. Sometimes you have to make major changes to the machine from West Asia Steel, or you will be offered a new type of Tray sealer packaging machine so that you can use it well.
Types of packaging methods by this machine
This method of packaging is the most common type of packaging. In this case, the film is cut from 2 to 2.5 mm from around the container and then packed on the opening of the container.
Packing with natural atmosphere method, in which case the product will only be safe against physical contact and mechanical impacts.
The modified atmosphere packaging method, which causes the atmosphere inside the package to be modified by the specified gas composition and finally the shape, color and freshness of the product to be preserved for a specified period of time. Carbon dioxide, nitrogen and oxygen gases are usually used to correct the atmosphere inside the packaging.
Packaging by controlling the respiration rate of the product inside the package, which is removed through micrometer holes, oxygen required by the supply package and excess carbon dioxide. This method can ultimately increase the shelf life of products such as fruits, vegetables and salads.
This type of packaging is used for products that the film should be easily removed from the container opening when using. Therefore, the tab created by this method can help to do this more easily.
Packing of round opening containers is done by outside cut method.
Packaging by controlling the respiration rate of the product inside the package, which is removed through micrometer holes, oxygen required by the supply package and excess carbon dioxide. This method can ultimately increase the shelf life of products such as fruits, vegetables and salads.
This type of packaging is used for products that the film should be easily removed from the container opening when using. Therefore, the tab created by this method can help to do this more easily.
This type of packaging is one of the common methods. After being placed inside the container, the product is packaged by a vacuum that causes the atmosphere to escape from inside it.
This packaging method is a combination of Peel point and Inside Cut method. In this method, the film is cut with a distance inside the edge of the container and then a tab is created next to it to make easier for the consumer to remove the film from the opening of the container.
Products that must be placed in buckets should be packed by this method. The buckets usually have high heights.
Device Drive System: Electromotor (Grade B) – Servo Motor (Grade A)
(Grade B) – Servo Motor (Grade A)
Device speed:
In vacuum packing and gas injection system: 5 to 7 cycles per minute
In the case of packaging in the form of a simple seal: 8 to 10 cycles per minute
Ability to work with plastic film in different thicknesses – aluminum foil and metallize
Ability to install filler of dilute and concentrated liquids as well as granular materials on the machine
Ability to install automatic denester system
Vacuum and Gas Injection System (MAP)
To maintain freshness and higher product residue
Machine Control System: PLC with HMI colored control panel
2 languages English and Persian
Accurate control systems for more correct operation of the device
Tray material: High quality aluminum alloy
inflatable shaft in the roll part of the machine
Roll replacement is done as soon as possible
Replace the tray in the fastest and most convenient way possible
Easy to set rails with graded system placed on the machine
Ability to work with Printed and unprinted film
Unwinding system: Electromotor (Grade B) – Servo Motor (Grade A)
Oily vacuum pump with very high suction power – 63 m3
Material: Stainless Steel 304 Corrosion Resistant – Washable
Machine Dimensions: Length 2.7 m – Width 0.9 m – Height 1.8 m
Air pressure required: 6 bar
High quality electronic and pneumatic components
Ability to install a variety of filler for granular, powdery products, dilute liquids, concentrated liquids and non-homogeneous semi-solid products
Ability to install devices to control and direct containers under filler openings
Ability to install UV tunnel before fillers to reduce the bacterial load of containers
Ability to install check weigher system for controlling Weight of products before packaging
Ability to install gas capsules for more precise control of gas in packaging by MAP method
Ability to install Remote Maintenance for easier customer supporting
Ability to install packaging system with printed film
Ability to install the rower machine in the output of the device, to convert the containers into a row and pass them under the jet printer and labeling
Ability to install Output Rotary Table, to accumulate containers at the end point of the device
Ability to install options to create the beauty of packaging
Other options, please be contacted.
The packaging process for various food products can have different methods, according to this issue, appropriate machines or equipment must be installed at the entrance and exit or in the tray sealer packaging machine to fulfill the desired request. Sometimes you have to make major changes to the machine from West Asia Steel, or you will be offered a new type of Tray sealer packaging machine so that you can use it well.
Applications of device in packaging:
Types of nuts and date palm
A variety of cold prepared food
(Such as Olivier salad, pasta, and semi-prepared food)
pickles (olives, pickled cucumbers)
meat products(Red meat, minced meat, chicken)
Processed meat products (Sausage, nuggets, hamburgers)
Sea foods (such as shrimp, fish)
Vegetables, fruits and salad
Packaging of some dairy products such as cheese
Bread and sweets
Request advice on buying this device